Welds strength?
Is the weld strength govern by weld electrode or base metal? In LRFD, the strength is govern by electrode(Fexx=70ksi), and the area is weld neck area. But the AWS D1.3, the strength is govern by base metal strength and its thickness.
That makes a big difference on allowable...
The belt will be used to move dirt or earch. The density is between 70-120 lb/cu ft. That is surface application not underground mining.
Is that enough to understand the situation?
Lenew
Hi guys,
I have a short flat belt:
1. 10 ft long;
2. 48 in wide;
3. 450 fpm for belt speed;
4. 12 inches for pulley diameter
Considering the speed and length, what kind of splice you think will be good? if use mechanical type, any bad effects?
Lenew
Dear everybody,
I need to design a short (20ft) conveyor to work with my digging machine, to move dirt/earth away. Because the space restriction, the design has to push everything to/over the limit (design guide) to meet the capacity requirement (22,000 cu ft/hr):
The parameters are:
1. belt...
SWscience:
Do you have any problems with Vaultadmin Toolbox tag? I am talking about PDMWorks2005. I found out that the directories in ToolBox list could not be edited. Whenever I tried to edit, it gave me error "can not creat new project in the vault".
We changed toolbox folder to a new...
I got answer to this question. The reason is I don't select Config (default, or a different). Once Config is selected, the quantities show up right away.
I don't understand why the PDMWorks references or reporting function always have a blank quantity column.
In BOM, it automatically creates the quantity for references. But in PDMWorks it is just blank.
How to make it link to the quantity of BOM?
Thanks.
Bradley,
Would you give an example how API can save a lot of time and money? I don't feel it is very useful. I really want to know where I can use to justify the time I spend on programming.
Lenew
I am not quite sure your question, here is my suggestion:
First, do you know vault can be installed somewhere different from vault computer?
You can install several vaults on a shared drive with different names. But remember one vault computer only links to one vault. The vault computer is...
I tried to manage autoCAD dwg files by PDMW. The associations I added seem to be unreasonable (reverse of SW concepts). For example, I check the top assembly drawing (DWG) in first, then check part drawing (DWG) and add association simutaneously. The part drawing did list under the assembly...
ctopher,
I am talking about keeping parts in a separate folder, instead of in the same folder as assy.
Sure you always can check in assy with all its references, then move parts to another folder. However it will be tedious to take ownership, change project,..., again and again, one by one...
Jerm99,
I solved that problem. I do the following:
1. check in parts first. (on version e.g. A.1 )
2. check in assembly. In the ready to check in list, you will see some parts on A.2. Force them to be A.1 by inputing into box of revision.
3. check in.
4. You can see some files failed to be...
tvrman, thank you very much. I upgraded my pdmw to sp2.1 after I saw your reply. I played for a little bit, seemed no problem in this short period.
Just don't know why this thing happens to only a small percentage.
Regards,
I have been obssessed with PDMWorks display problem. I am using SW 2004 with PDMW 2004. The mouse cursor disappears and right click menu missing text, and many other odd things. Anybody has same trouble? Close sw and re open sw will fix the problem. Then it shows again and again.
Anybody...
Have anybody experienced right click menu problem? I am experimenting PDMWorks. After running PDMW with sw, I have seen one problem several times. The right click menu does not show properly, and the cursor is invisiable in the graghic area. I have to reopen sw to get it work as properly. My...
Bradley,
Thanks for your sharing of experience.
Here I have another problem, hoping to get suggestions.
I wanted to check a project in the vault. The original project was organized into several folders, Some for parts, some for assemblies and some for both. I created a project and several...
I am just starting to make rules for PDMW users. Each part has to have unique name. So how do you make naming rules? I found that a new part outside the vault but with same name as the one in the vault, will be shown green upward arrow. In the meantime, the project name should be unique, too...