Ok- now it gets really weird:
The driving pulleys are on the same shaft; the motor. The other pulleys are on two heads (small pulley on inner head, large pulley on outer head). The ratio is designed so if the heads start with their 12 o'clock positions lined up, then each revolution the outer...
I have a machine with some sets of timing pulleys and I need to calculate the gear ratios. All are H-series, 3/4" wide belts.
Set #1 has a driving pulley with 39 teeth and a driven pulley with 76 teeth.
Set #2 has a driving pulley with 30 teeth and a driven pulley with 57 teeth.
I get these...
So I finally found my company's default formats. They were stored out on the network.
http://www.eng-tips.com/viewthread.cfm?qid=223581&page=1
Now I need to change the symbol in the title block. Currently the symbol is "logo_dxf_sm.sym.2" but I need to change it to "boa_snake," just like in the...
Thanks for the help everyone. I ended up searching my whole network (the M:\ drive here) for "metric_a3.frm" and found it. I then added pro_format_dir to my config.pro file and pointed it to the correct directory.
Now I have to update the title blocks. See next thread...
Ben,
Thanks for the response. I guess in my frustration to get all the images together (becasue I just couldn't get the HTML / TGML to work) I really missed the point of this thread, which is:
"My config.pro file does not have the pro_format_dir value in it, much less a directory to point it...
This thread is similar to tazengr's thread http://www.eng-tips.com/viewthread.cfm?qid=195150&page=10 that was closed without ever really getting answered.
When I create a new drawing, I click File -> New -> Drawing and select "Empty with Format." This brings up a window with all the formats I...
I have a plate that is supposed to get bolt holes in three locations. I created the attached photo by:
1) Created the the head clearance hole and patterned it for four instances.
2) Added one shank clearance hole
3) Added one threaded hole
All holes have 60° spacing on a 30mm bolt circle...
What would be an example of the address for each of these?
C:\....?
Since no one outside of IT has administrator rights here, I have to dumb this down as much as possible when I ask them to log in and let me change things.
<loadpoint>/text
User's home
Pro/E StartIn
When I search my HDD for config.pro, it shows me one in C:\Program Files\proeWildfire\jlink\jlink_appls\jlink_elev and one in C:\Program Files\proeWildfire\jlink\jlink_appls\jlink_param.
I opened it with Notepad but there's only a little bit of data in there.
Where else can I access the...
Appologies in advance for this being long.
I'm a new Pro/E user at my company with a background in SW. Of all the users here, everyone has a different way to use the software and no one really knows how to do much with it (at least regarding initial setup and configuration issues). Any help...