Search results for query: *

Please assign each wall as a separate pier.

Go to "File" menu and then select export "Submenu".

Step 1) Delete your shear walls and save this model as a separate file. Multiply your rho with four.(rhox4), this will reduce your Cs to 25% of the original. Proportion your moment frame for this 25% of total base shear. Step 2) Now in your original model use these sizes as minimum. And run the...

KISS (Keep it Simple Stupid)...just add the Uz (Support reactions) that your building dead weight. Cntr+C and it will copy the table to excel.

Remember that ETABS transfers the loads only at the end points of elements. You need to provide as many segments to beam and slab (meshing) in order to achieve near uniform/accurate mass distribution in the model.I would recommend at least three divisions on each elements.If you do not segment...

I second drp181.

Are you going to design the waffle slab using ETABS ? I doubt if it does that. You can put the self weight to zero for a regular slab, and put equivalent SDL on the slab enements for reaction purposes. Also, you need to provide cracking MOI -"Icr" for deflection purposes. I hope that helps.

construct the supports at first. And then in 3D view draw the slab/roof...it will work.

if you go to www.csiberkeley.com and www.csiedu.com you cal D/L a plethora of tutorials...

you need to check the min values for column. If that is not being exceeded your output will not change. try reducing column size.

if there is a link that CSI people are reading I would love to make the software sweeter....

RAM sucks big time. Shift to ETABS !

ETABS 9.1.5. and REVIT 2008 integration is now available.

I'd use a line load convert from psf to plf !

Id suggest you to invest in ETABS/SAP...rather than any RAM varieties...EABS and SAP are very user friendly and flexible. It has a good online support and tutorials. RAM too has tutorials online but the do not work. Going by my experience you will be wasting a lot of time struggling with any...

I fail to understand your question. You want to "shore" up the buildings while allowing to "move"? Could you elaborate your question ? thanks

you cant find it as revit4 and etabs dont work togather. !! and CSI sayd it wont be further upgarading as its causing them imnese problems in doing so ! but revit 3 works with ETABS !!

numerous errors indicate that there are shortcomings in your model...you are apparently a beginner...ytr going to CSI website and use watch and learn for ETABS...I hope that helps..

you can shut off the annoying horror themed music...but I doubt if you can replace that by a melody....try going ETABS folder it would have a .wav file....try replacing it by another .wav file... goto option> sound (unchecked)