Search results for query: *

Thank you

Hi All, I am new CATIA, anyone is having basic training material / or site available Thanks in advance

Hi All I want to output the postname in the start of the program. if i place variable mom_event_handle_name, it gives me complete path. I want only post name triggered. For example ( POST NAME : XYZ ) How to get this type of output. Thanks in Advance.

Create the tool in UG and export to library. there is option in the tool defining dilaog box where you can export to tool library. or add the list of tools in the tool library dat file, in the same format

Thanks for reply. Let me more specific, i am trying to keep my all start events, from move, auto tool change and first tool to only INITIAL & FIRST move. by keeping only Initial and first move how to control the output. I have pasted few blocks of sample of codes. G53 Z0.0 T115 T23 M06 (...

Hi all How to out tool information before the start events(UDE) information Example G53 Z0.0 T1 T71 M06 ( ----------------------------- ) ( CENTER DRILL ) ( ) ( CENTER DRILL 14 RADIAL HOLES. ) ( ----------------------------- ) G65 P8000...

Hi I am using NX4...

Hi all How to take the lathe cross section for the round part having the boss on dia, which is not 360 degree. Is there any automated process for taking the cross section

Hi All Is there any difference in the blocks G94 G17 G81 X Y Z F and G17 G81 G94 X Y Z F does both blocks gives same output..? Thanks

Hi Is there any way to generate 5 axis toolpath for STL part file in NX6 Thanks

Hi All I want to source the custom procedure for before motion event. I have sourced the TCL file, in which i have placed the new custom procedure for before motion, after placing procedure in before events, still it is not reading from the source tcl file

Hi Can any one explain me how to use MOM_add_to_block_buffer, and in which case it can be used Thanks

Thanks John, In post builders do we need to insert any custom command for this (cancel cycle and retract) I have one more doubt if i want to change the zero format to 0. For example X 0.00 should appear as X0. How to incorporate this with postbuilder, Manually I have inserted the zero...

Thanks for information, Is there any alternative to get the desired output.(attached in previous message)

It is used to force the address, like, G_motion, X Y Z fourth_axis and fifth_fith you can get more details of MOM_force, once and always from MOM built in commands

Hi all How to remove the rapid move default rap1, rap2, rap3, and my second quetion is In attached picture 1 I have done drilling of 4 holes in one operation and output is very fine. In picture 2 Separate drilling operation created for each four holes, when I take output for each...

Hi All How to force output of Spindle speed and M_spindle (S M03). I have 3 instance operation, only in the 1st operation i am able to trigger S M03 output by adding in initial move, and after adding in the first move also there is no output of S M03 in rest of instanced operation.

Hi How to take the information of assembly files from postprocessor. I mean what all the parts present in the assembly and which part is used for programing..is it possible to print in DNC file from postprocessor. Thanks

Thanks its working...

Thank you verymuch for information, After adding in to before motion, it is not giving any output...anything need to be modified in the proc...? could you please explain how to go about it. Thanks