Search results for query: *

I am currently looking to seal an outlet, for which we have 7 different sizes (see "outlet dims" for dimensions). Product passing through the outlet can vary, with anything from metal powders to food or pharmaceutical product being used. The idea is to have an inflatable seal or bladder, where...

I am currently looking into the available options for applying text and possibly graphics to enclosures (300H x 300W x 210D). The enclosures are to be Stainless steel or painted sheet steel, depending on what options are available for either in terms of quality and cost. The annual quantities...

Thanks ajack1 for your help... I'll try to find out what they can offer.

Thanks for your response alansimpson, but in terms of rapid prototyping, for metals the cost would be excessive (if thats what you are suggesting), irrespective of quantities for production. Thanks as well ajack1. It really sounds like you have a good deal of experience with applications such...

Thanks for your response drawoh. I have attached a legacy zip file, which should be compatible with most forms of archiving software versions. I have emailed several local suppliers without response as yet. I was just wondering if anyone could give some advice on the design or any manufacturing...

I am looking to get stainless steel sheet metal part manufactured. It's a fairly complex shape and I don't know much about sheet metal work and what processes are available. Two options/parts are shown in the attached picture. Does anyone have any suggestions? Is there any way of forming the...

Peek is another material, which is probably ideal for your application. However, this is not cheap, and if you did go for this, you will be looking at about 5 times the price of ertalyte.

Quadrant plastics would be a good bet to find your ideal solution. They have excellent technical support and if you ring them up, explaining your application, they’ll offer a cost effective material to achieve what you require (btw – I don’t work for them but it sounds like it doesn’t it). I...

Thanks for the input. The S35 crompton DC injection brake may well be worth a try. I think the one I used was similar to the s10: http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=2096384&cm_vc=av_uk This DC brake is rated at 2.2KW and the motors I tested were...

I am looking to find a way of braking three phase vibratory motors quickly, as the motors have excessive levels of vibration on shutdown. An example spec of one of our vibratory motors is as follows: 3-phase, 0.9KW, 1.45A flc, 400V supply @ 50Hz These vibratory motors are usually just run DOL...