Search results for query: *

I add "Translation or Rotation" command to my "Move" toolbar in assembly While in Assembly Design click on the command and then the part or product, then click on the "Position" tab for location.

Have you tried opening the NX file in notepad and searching for "NX"? On the files I tried it on it comes to a line that lists multiple NX versions, I assume the first one listed is the latest version it was saved in Side note - same can be done with a catia file. search for "Last", "Min", etc...

Would using the "Log File" help for what you are doing? Specify the output and do a dry, open the txt file and make modifications as needed. Change "NAMING_RULE" to "USER_NAME", 4th(?) line down from the top. Then run the clone and use the "Load and Apply Existing Log File". I always point the...

Got it theSession.Parts.SetDisplay(workPart, False, True, loadStatus)

I am trying to get a journal to cycle through an assembly with no luck. I get the error: "Failed: NXOpen.NXException: This operation can only be done on the display part at NXOpen.Layer.LayerManager.GetAllObjectsOnLayer(Int32 layer)" I am assuming I need to make the prototype...

Is there a way to find out what layers are included in a reference set? Is it possible to write a journal to list all reference sets and the layers included in each? Thanks, Kevin

Curious if anybody can explain the differences between a traditional catia license and a plm express license. Pros and cons between the two? Thanks Kevin

Sorry, i should have been more specific. I can't fillet Join.190. I will try the CATDUAV5

Fernando, I have attached a file, I get the error when I try to run a variable fillet. If I separate the surfaces I can use Shape Fillet without issue. After reconstructing a shelf I no longer had issues (Join.130) Any help in understanding the error would be much appreciated. Thanks, Kevin...

I am doing some surfacing and I am getting an error that I do not understand. It seems to only effect "Variable Fillet. Any help with this would be greatly appreciated. Error: "Feature Definition Error" "In-Out Cycle detected in feature structure" Thanks, Kevin V5R22

If your assembly load option is set to "Structure Only" the above journal can be used to selectively load parts based off text search based off user input. Example: user inputs "01", any file in assembly that contains "01" will be loaded. Do an alt+F11, paste in code, save and give it a try

Here is something I am working on that may be of use: Imports System Imports NXOpen Imports NXOpen.UF Imports NXOpen.Utilities Imports System.Collections Imports System.Windows.Forms Imports System.Collections.Generic Imports NXOpenUI Module NXJournal Dim theSession As Session =...

What about placing then in a Geometrical Set? Then you can reorder as needed.

You could try "Global Deformation" using "Points from File" as the Defined By Text document example would be like: -334.612 495.821 -109.404 0.442 2.184 8.060 -333.567 495.182 -109.236 0.441 2.169 8.019 -334.621 494.557 -109.067 0.438 2.186 8.072 Format: actual locations in X Y Z followed by...

I am running a K2000 and it seems to work just fine for me. But, I am using the 340.52 driver. If I remember correctly there are new drivers but we were having issues with those.

Not sure if this will work in Snap. ' ----------------------------------------------------------------------------------------- ' Creating Feature Group ' -----------------------------------------------------------------------------------------...

Sorry but I misspoke, graphics driver 340.52.

Have you tried placing your catsetting in an alternate location so that when catia opens it creates all fresh catsetting? If you can, run like that long enough to see if things are noticeably faster.

I use V5R22 with a Nvidia Quadro K2000 with the graphics driver 347.52. If i used the latest graphics driver I had issues, "Ok to Terminate". Also, make sure you have a separate set of catsetting for each version of catia you run. Don't use catsetting for R22 that were saved in R23.

To add to itsmyjob statement, use "Boundary" with the "Create Datum" toggled on. This will create a datum curve for each hole.