hi there,
just double checked the error in Gwizzard G-code editor and its 0.0011 not 0.00011 :
Line 35: X2279.009Y712.655Z13.5I2270.117J723.357 Distance from last move to center = 19.3880
Distance from this move to center = 19.3869
Arc endpoint: 2276.3430, 735.8020, 13.5000
Arc center...
Hi there,
Tingsryd:
I don't thing dirty geometry should be the issue, as I created the geometry in NX and it's fairly simple, but does contain 2 spline curve's.
I tried increasing the linear motion resolution in the post to 5 decimal points (machine control only handles 3 dp which is...
HI there,
i have recently come across a problem posting circular moves in NX 8 cam to a rather old control, a Bosh cc120, never had the problems before, but it has cropped up a couple of times recently,
Offending code:
G1 X2273.607 Y736.724
G2 X2276.343 Y735.802 I2273. J730.403
after a...
thanks a lot again shags,
that seems to be along the right lines, defining a global variable in the program start seems to make it truly global, which is what i was stuck with in my inital post.
i think i need 2 global variables for the start of path "IF" command to check. as there are 2...
hey there shags72,
thank you very much, there fixture offset block was not all ready there, but it was easy enough to make one.
so that solves the first problem, but now i need to get the post to output something to the effect of the below output literals every time the offset changes...
Hi,
i am in the process of working the kinks out of a DIY post i've made for a BOSCH cc120 used to control a router.
i use G54 - G57 as references for the 4 corners of the machines bed, and regularly use 54 and 55 when flipping a sheet over to machine on both sides.
i have a custom command...
hi there markrief, thank you for your reply,
Yeah ideally i would use the planar_profile operation with a user-defined tool, but as this uses boundaries rather than faces to design its machining area, i don't seem to be able to get it to work with feature based machining, i could detect the...
hi again,
just in case anyone else has smiler problems, i thought id let people know that i sorted the problem - i hadent fully defined the feature before teach feature,
from digging firther in to the manual i found you have to first defign the feature with 3 x Planes ( can only be between...
Hi,
I am programming wooden Parts to be cut out on a CNC router,
the parts in total have over 400 faces selected for a 3d contour operation used to follow top edges of faces with a form tool, as a work around because i am using Feature detection and will be using a Round over / radius tool...
Hi There,
I have recently started trying to use FBM in NX cam to program wooden parts such as:
http://files.engineering.com/getfile.aspx?folder=4434b07a-ee73-4c4c-b7c8-d13db9803442&file=PART.JPG
this is just a test part, Product parts are much larger and more complicated. as the Blend is...