Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

03 detection

Status
Not open for further replies.

enigmapaul

Electrical
Aug 9, 2021
7
Hi Folks,

I'm looking for an ozone detector or solild state sensor that would be capable of detecting ozone concentrations in room air. Looking for a range of < 5ppb to 50ppb or so.

I can work with just about any kind of sensor or interface signal.

Thanks!
 
Replies continue below

Recommended for you

Parts per billion? You may have a tough time there... per million is readily found at all of the usual component shops.

Curious why you need to detect such low concentrations...

Dan - Owner
Footwell%20Animation%20Tiny.gif
 
Used to continuously verify regulatory limits for electronic air cleaning units in the field. 5ppb for UL. 50ppb for carb.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor