100 Degree Countersink Tolerances 1

[bosworth2469]

I am working with 100 Degree Countesunk NAS hardware and I am looking for good objective standard tolerances for drawings. Any advice and/or direction towards some standards would be greatly appreciated




BW2469

 

[ctopher]

Do you have a copy of the Machinery Handbook?

Chris
SolidWorks/PDMWorks 08 3.1
AutoCAD 08
ctopher's home (updated Aug 5, 2008)
ctopher's blog
SolidWorks Legion

 

[bosworth2469]

I do indeed, and of course there are NAS specs for the hardware, but no toleranceing.

I can generate my own...usually .030 to .031 over and Position accordingly.

I was just hoping that perhaps there were some standards already available.

 

[ctopher]

I don't have specs with me at the moment. Does this help? thread404-180852

Chris
SolidWorks/PDMWorks 08 3.1
AutoCAD 08
ctopher's home (updated Aug 5, 2008)
ctopher's blog
SolidWorks Legion

 

[bosworth2469]

Not exactly what I was looking for. Found it in another reference I had.

IF this sparks interest in the future, I could post somewhere

Thanks for the help