glynnmack
Mechanical
- May 18, 2012
- 6
Hey all,
I'm in a bit of a pickle trying to find 18" Balancing Valves on the discharge of Chilled Water Pumps. Not only can I not find any above 12" from the standard valve suppliers (Crane, Velan, etc.), but I've also been told that they would be very expensive and large (space is tight). These people have recommended Butterfly Valves, which I know are limited in their ability to throttle flow. Any thoughts or recommendations to deal with this problem?
For reference, the chilled water pumps are on Variable Frequency Drives and oversized for future chilled water demand increases. The balancing valves will be used in the meantime to bring down the flow to the current levels.
Thanks,
GlynnMack
I'm in a bit of a pickle trying to find 18" Balancing Valves on the discharge of Chilled Water Pumps. Not only can I not find any above 12" from the standard valve suppliers (Crane, Velan, etc.), but I've also been told that they would be very expensive and large (space is tight). These people have recommended Butterfly Valves, which I know are limited in their ability to throttle flow. Any thoughts or recommendations to deal with this problem?
For reference, the chilled water pumps are on Variable Frequency Drives and oversized for future chilled water demand increases. The balancing valves will be used in the meantime to bring down the flow to the current levels.
Thanks,
GlynnMack