19 inch Rack 1

[duddini]

Hi all,

I've done a search here trying to find a CAD model of a rack with no luck. I'm hoping someone can point me to a web site that at least has 2-D drawings of a rack. I know the mounting hole standards, I'm just trying to model a rack for a proposal; the dimensions for the vertical posts and front rail would be great.

Thanks,
Bob

"You can observe a lot just by watching"
Yogi Berra

 

[ArtemTat]

I believe a 3DCC of SolidWorks has the required models in the content:

http://www.3dcontentcentral.com/

Artem Taturevich, CSWP
Software and Design Engineer
AMCBridge LLC

http://www.amcbridge.com

 

[ArtemTat]

Also have yuo checked the Toolbox library? I think this models should be presented there as well.

Artem Taturevich, CSWP
Software and Design Engineer
AMCBridge LLC

http://www.amcbridge.com

 

[duddini]

Thanks ArtemTat,

The 3dcontent had something pretty close that I can use, I appreciate the tip. Believe it or not my company didn't pay for toolbox, so I don't have a registration code to activate it. Go figure

Thanks again,
Bob


"You can observe a lot just by watching"
Yogi Berra

 

[ShaggyPE]

Its been a few years since I went thorough Hoffman's online configurator, but it worked well and I was able to download the model. It is probably even better now.

http://datacomconfigurator.hoffmanonline.com/configurator/

Their home site is

http://www.hoffmanonline.com

good luck

-Dustin
Professional Engineer
Certified SolidWorks Professional
Certified COSMOSWorks Designer Specialist
Certified SolidWorks Advanced Sheet Metal Specialist