Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
2" Swing Check Valve Vs Ball Check valve for compressed air system 150 psi.
- Thread starter Mechh007
- Start date
racookpe1978
Nuclear
How is the air line running? Vertical, horizontal, angled down to drain water?
Instrument air or service air?
What is expected max flow, normal flow (often zero in some runs used mainly during outages!), and service life?
DO you have a dryer in the line upstream?
What is the penalty if it fails open? If it fails shut?
Life critical application? Mission critical?
Instrument air or service air?
What is expected max flow, normal flow (often zero in some runs used mainly during outages!), and service life?
DO you have a dryer in the line upstream?
What is the penalty if it fails open? If it fails shut?
Life critical application? Mission critical?
- Status
Similar threads
- Locked
- Question
- Locked
- Question