2024-T3 Drawn Tube AMS 4086/WWW-T-700/3

[metman]

1. Do we need to get the specification from Global
Engineerig or is it avilable on the web?

2. Any ideas on a supplier for Initial Outside Diameter of
3.75 inch X Wall thickness .375-.5 inch?

3. I first went to FAQ's but not much help also tried
Google > Online metals etc.

Thanks in adance.

Leonard

Jesus is THE life,
Leonard

 

[TVP]

Leonard,

First, I could not find

http://WWW-T-700

on the government standard website (

http://assist1.daps.dla.mil/quicksearch/).

You will need to order SAE AMS 4086 either from Global or from SAE.

Second, the following distributors supply 2024-T3 Al tubing that meets SAE AMS 4086:

http://www.futuremetals.com/index.htm

http://www.principalmetals.com/prim...&MetalName=2024+-T3&Form=Round+Tube-+Seamless

http://www.diversifiedmetals.net/products/aluminum.htm

I am not sure who manufactures this tubing. I tried Alcoa, but they only seem to do 6xxx series as standard. Kaiser probably makes this out of the Chandler, AZ facility.