2D Component Catia V5

[Webbo1981]

Hi All

How do I show a 2D Component in the Drafting workbench, such as a nut?

Do I have to use a standard catalogue that Catia should have and insert the 2D Component or do I have to create my own 2D Component drawing and insert this from the catalogue?

Thanks in advance

 

[ferdo]

You can use both variants, even without catalog.

Regards
Fernando

https://picasaweb.google.com/102257836106335725208

https://picasaweb.google.com/103462806772634246699/