Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

3 Way control valve

Status
Not open for further replies.

MagicJS

Mechanical
Dec 21, 2004
13
Can a three way control valve between supply & return headers also be used as a differential bypass?

Do you need custom controls or does someone make a valve like that?

Thanks.
 
Replies continue below

Recommended for you

Is this a Primary Only system or Primary + Secondary piping

2 way valve (instead of 3-way valve) may be used in the bypass pipe with a pressure sensor modulating this valve

This method is usable when the load control valves are of 2-way type and that the pumps are of constant speed type. Again, this will not save pump energy since pumps alwaysseems the same flow. Also there is no reduction in Head seen by pump since the head is used up in ovecoming balancing valve in bypass pipe.

Can give more info if you say the purpose of this by pass planned by you

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor