Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

3 Wythe Brick Weight

Status
Not open for further replies.

ntattose

Structural
Apr 13, 2011
44
Does anyone have a weight for a 13" 3 wythe brick wall?
 
Replies continue below

Recommended for you

Standard single wythe brick (3 5/8 in thick) is 35 psf. I typically use 40 psf for new design. For a 3-wythe wall I’d use 3 x 40 = 120 psf.

 
I use 40 psf for hollow brick veneer. These old 3 wythe walls are solid brick with 2 layers of mortar. I'm afraid this weighs more, but I'm not sure.
 
I believe 120 psf is about right, but if you're worried, make it 150 psf, same as concrete. Surely it doesn't make a great deal of difference to your calculations.
 
Isn't that what load factors are for? [smile]

-----*****-----
So strange to see the singularity approaching while the entire planet is rapidly turning into a hellscape. -John Coates

-Dik
 

If it does, you may have other problems...

-----*****-----
So strange to see the singularity approaching while the entire planet is rapidly turning into a hellscape. -John Coates

-Dik
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor