Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

350z spc alarm z axis pulse coder

Status
Not open for further replies.

filocco

Mechanical
Jul 5, 2012
24
0
0
AR
Hello,

They can advise on this alarm?

350z spc alarm z axis pulse coder

Machine laser: Amada 1212alphaII - 1995.

thanks!
 
Replies continue below

Recommended for you

About all you can do is inspect the cable. Look at the connection on each end. Look for any breaks or damage to the cable.

There are three parts to the system. Motor, Cable, and Servo Amplifier. The cable is the most common and easiest / least expensive to fix. Start there.
 
Status
Not open for further replies.
Back
Top