Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

3D rotation and revolution of cylindrical roll boundary condition

Status
Not open for further replies.
I am trying to rotate as well as revolve a cylindrical roll. Using rigid body coupling constraint i have made the roll as rigid and it is made to rotate about a point(RP1). But i am not able to provide revolution to the cylinder about a point(RP). Is there any solution to this problem.....
roll_bc_qaql77.png
 
Click to expand...
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question Question
Abaqus radial expansion and rotation
Replies
6
Views
5K
S2196L
S
AC1999
  • Locked
  • Question Question
NO FLOW boundary condition
Replies
1
Views
399
FEA way
FEA way
A
  • Locked
  • Question Question
Symmetric boundary conditions
Replies
3
Views
1K
Ali asger
A
Nir_k
  • Locked
  • Question Question
Failure of symmetric boundary constraints in Abaqus
Replies
1
Views
2K
FEA way
FEA way
alegio20
  • Locked
  • Question Question
How to define an elastic boundary condition? Rotational in my case
Replies
4
Views
462
alegio20
alegio20

Part and Inventory Search

Sponsor

Back
Top