3DX CATIA; Macro or function to list parameters used by geometry within a geoset [HELP!]

[LWarp5]

Hello!

First time posting here, hopefully someone here can help!

I am interested in seeing if there is a function (or implementable macro) that lists all the parameters that are related to a geoset. This would allow me to easily check geosets to make sure the correct parameters are utilized, without having to individually check each element/geometry using historical graph or selecting each element.

My ultimate goal would be to create a macro that would replace a certain parameter for all elements in a geooset that I select. The macro would:
1. Select a geoset containing elements/geometry that are parameterized
2. Select parameter that I want to replace
3. Insert new selected parameter in the same equation
4. Repeat for all geometry in a given geoset

Any input would be much appreciated. I have little VBA experience, but I am learning it on my own time.

Thanks!

 

[ferdo]

For inspiration check [youtube EfPY9OYDP9Y]

Regards
Fernando

https://www.youtube.com/playlist?list=PL9mSHa4SOedV3dr0D3kfIWFUg7mIYm94k

https://www.youtube.com/playlist?list=PL9mSHa4SOedVUEkEojiX_kdzpe0sDbaz2

 

[Little Cthulhu]

Insert new selected parameter in the same equation

What equation are you talking about? I suppose all you want is to change parameter's value, don't you?

 

[ferdo]

Recently, I need to do some changes to some parts in 3DX. I believe this is a good example of what you can do without a macro.

[youtube KE9z8uczLG8]

Regards
Fernando

https://www.youtube.com/playlist?list=PL9mSHa4SOedV3dr0D3kfIWFUg7mIYm94k

https://www.youtube.com/playlist?list=PL9mSHa4SOedVUEkEojiX_kdzpe0sDbaz2