Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

4" Fig 602, 10m Long Pipes

Status
Not open for further replies.

apiask

Mechanical
Oct 18, 2016
2
Hi,

I've got a RFQ for 4" Pipes, 10m Long with 4" Fig 602 Thd x Wing Weld Ends and the delivery is within 1 Week.

The question is, Whether, Can i Weld the 6m and 4m Pipes together or it should be 10m single Long pipe?

Since i have the 6m Long pipes already in stock.

Service: H2S.

Please advise. Ofcourse, I can ask the customer, but before that i wanted to be sure.

Your reply is really appreciated.

Thanks & Regards
 
Replies continue below

Recommended for you

Ask the client, it matters not what anybody states on this forum!
 
spot on Metengr, Any opinion is meaningless!!! The Client has the last call on this.
 
Can you - Yes.

will the client accept it? No idea.

Can you weld and supply in the time frame?

Offer it and see.

Or provide both options. If 4m and 6m pipes joined are faster delivery and cheaper then.....

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
@Metengr @DSB123
Thank you for your response.


@LittleInch

I'll do it like you said.

Thanks.

Thanks & Regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor