Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

5 gallon bucket cad file

Status
Not open for further replies.

dbyrne

Mechanical
May 9, 2005
10
Does anybody have a cad file you can send me? It is for concept only and would be nice to show in my design.

thank you
 
Replies continue below

Recommended for you

Need model for 5 Gallon pail with lid. thread559-143699

[cheers]
Helpful SW websites FAQ559-520
How to get answers to your SW questions FAQ559-1091
 
Why post links to other threads with the same question and no answers?

-b
 
Seemed like a good answer to me. A bucket is easy to create.

Chris
Systems Analyst, I.S.
SolidWorks/PDMWorks 05
AutoCAD 06
ctopher's home site (updated 06-21-05)
FAQ559-1100
FAQ559-716
 
Why not?

I had one once that I modeled myself--would need to dig it out of an archive to find it. If you really don't want to model it, send an electronic communication to me, the address of which can be found at my web site and I'll see if I can work it in (kludge of a sentence trying to avoid using a certain word--wink, wink).

Jeff Mowry
Reason trumps all. And awe trumps reason.
 
bvanhiel ... to show that if a search had been done, the poster would have seen that the question had been asked before. Just because the replies were'nt positive does'nt mean that they were'nt answers.

[cheers]
Helpful SW websites FAQ559-520
How to get answers to your SW questions FAQ559-1091
 
CorBlimeyLimey

I wouldn't assume that a search hasn't been done just because they didn't find a particular thread. I've searched for discussions I participated in w/o any success before.

In fact I just typed 'bucket' in the search engine. 7 results, but this thread and the previous 5 gallon bucket thread weren't among them. '5 gallon' got the old thread, but not this one.

Search doesn't really seem to work very well. I feel really really lucky if it 'happens' to find what I'm looking for, but I don't assume it means what I want isn't there.
 
You can search for, 5, gallon, bucket, lid, send me, or "my replies". These will get most.

Chris
Systems Analyst, I.S.
SolidWorks/PDMWorks 05
AutoCAD 06
ctopher's home site (updated 06-21-05)
FAQ559-1100
FAQ559-716
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor