7.5 Drawing View Display not updating correctly

[Dplance3]

I've recently moved to NX 7.5 from 6 and have had no display problems. My new 64-bit machine has a Qundro pro video card. Here's the problem I'm now having. While in a drawing and trying to do View Dependent Edit or dimensioning the views outside where I've zoomed into do not display correctly when I move or unzoom my view. I can move around and zoom in and out with ease and the display is great. But when I do any sort of work in a view I get that display problem. What do I need to set to get it to display correctly all of the time?

 

[JohnRBaker]

Can you provide some images of what it is that you're seeing?

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.

 

[Dplance3]

yes, though I can't show the whole drawing. -01 shows what it looks like when I update the views. -02 is right after I've zoomed up on the right hand view and did a view dependent edit and zoomed back out.

 

[JohnRBaker]

You only uploaded the -02 image. If you're trying up upload more then one file, zip them first.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.

 

[Dplance3]

OK, I'n new at posting here. I've come for info many times though. My system is an AMD FX3100 64-bit, 8 GB ram and Nvidia Quadro graphics card.

 

[Arkance/PhoeNX]

It sounds a lot like a bug that was fixed in NX7.5.2 where the display doesn't update correctly after zooming in or panning in drafting.

You'll probably find that your on NX7.5.0.32 (Help _> About NX -> System Information). If you are, download the NX7.5.2 or higher Maintenance Release from Siemens.

Anthony Galante
Technical Resource Coordinator

NX4.0.4MP10, NX5.0.6, NX6.0.5, NX7.0.1, NX7.5.0-> NX7.5.5 & NX8.0.0 -> NX8.0.1

 

[JohnRBaker]

Have you forced a full display update of the drawing views?

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.