Yesterday at 7:35 AM #1 B Brooke William Industrial Nov 7, 2024 4 I want to manufacture turbine blades with Waspaloy. What are the yield strength and tensile strength at 650°C, and do you have any recommendations?
I want to manufacture turbine blades with Waspaloy. What are the yield strength and tensile strength at 650°C, and do you have any recommendations?
Yesterday at 2:18 PM #2 Gr8blu Electrical Aug 18, 2021 695 I take it you've already researched the "basic" properties of the material. https://www.specialmetals.com/documents/technical-bulletins/waspoloy.pdf Maybe graph the known data and see where the curve falls at the desired temperature condition? Upvote 0 Downvote
I take it you've already researched the "basic" properties of the material. https://www.specialmetals.com/documents/technical-bulletins/waspoloy.pdf Maybe graph the known data and see where the curve falls at the desired temperature condition?
Yesterday at 4:56 PM #3 EdStainless Materials May 20, 2004 16,116 There is likely data for this alloy in MMPDS also. It has been around since the 50's so there is lots of data out there. Upvote 0 Downvote
There is likely data for this alloy in MMPDS also. It has been around since the 50's so there is lots of data out there.
