Abaqus 6:11, reduce noise and vibration for high speed impact

[viviana15077]

Hi Guys,

I am working on a three point bending model, the impact velocity used is 54 km/hr, when I look at the force-displacement curve, I could see a lot of noises and vibration which makes sense because it is nonlinear, high speed impact. But, how do I reduce these noises and vibration to get a smooth curve. Any ideas would be appreciated.
Regards
Vivian

 

[rstupplebeen]

You can either provide damping or filter your data. I hope this helps.

Rob Stupplebeen

http://www.optimaldevice.com

https://sites.google.com/site/robertkstupplebeen/