Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ABAQUS and Soils Initial Conditions

Status
Not open for further replies.
copernic

copernic

Civil/Environmental
Nov 11, 2010
9
Hi There,

I am modelling a retaining wall through ABAQUS. I am wondering when I use the command "initial conditions, type=stress, geostatic", should I define gravity load as well in geostatic step?

thank you
 
Status
Not open for further replies.

Similar threads

S
  • Question
Abaqus radial expansion and rotation
Replies
6
Views
4K
S2196L
S
A
  • Locked
  • Question
Symmetric boundary conditions
Replies
3
Views
1K
Ali asger
A
liq001
  • Locked
  • Question
Possible to add initial strain in ABAQUS?
Replies
1
Views
301
FEA way
FEA way
I
  • Question
Abaqus subroutine
Replies
3
Views
3K
FEA way
FEA way
I
Abaqus Subroutine
Replies
2
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom