Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ABAQUS, Split Part by Partition-Cells 1

Status
Not open for further replies.
sheeeshamk

sheeeshamk

Student
Feb 8, 2024
7
Hello People,
i am trying to split a part into 2. Is there a way to just mark a set of cells and make them into a individual part.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
You can copy the part and remove selected cells (by removing their faces) in the copy.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

shubbad
  • Question
Abaqus-CAE : Radial Partition
Replies
5
Views
2K
FEA way
FEA way
S
  • Question
Welding Simulation by AM Modeler in Abaqus
Replies
4
Views
3K
Soliman5958
S
abc123ali
  • Locked
  • Question
How to create surfaces in one part using partition
Replies
5
Views
106
FEA way
FEA way
TheFinalSundown
  • Locked
  • Question
Abaqus - Stresses on moving deformable part
Replies
3
Views
39
FEA way
FEA way
ShiningEngineer
  • Question
Abaqus Hyperelastic MAterial
Replies
3
Views
1K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom