Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations The Obturator on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Abreviation help. 1

Status
Not open for further replies.
Replies continue below

Recommended for you

Agree with macmet: centistokes

Patricia Lougheed

Please see FAQ731-376: Eng-Tips.com Forum Policies for tips on how to make the best use of the Eng-Tips Forums.
 
Notice the lower case 'c' for centi, and the upper case 'S', for Stokes, which, being a name, is capitalized.

m, for meter is lower case, for example, but units named after a person are upper case:

Amps
Watts
Celsius
Stokes
etc etc

 
If cSs is plural for centi-Stokes, the folks should not have used an s at the end to pluralize units unless spelled out.
 

The SI unit for kinematic viscosity is m2 s-1.
1 m2 s-1 = 106 cSt.
 
Thanks Gull and 25362. Seems to me that there is a plethora of viscosity units!!

poise
Stokes
Saybolt
m2/s
pascal second

Me thinks if there was this many different units for voltage we'd all still be driving horses.
6okguh2.gif


Keith Cress
kcress -
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor