Is this possible. I used ACADR14 for the longest time but it was great for dual monitor setup. Can 2002 and later, do the same. I know you can have multiple drawings open in one session of autocad 2002, just wondering if it is possible to have another session open. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ACAD 2002 multiple sessions.....
- Thread starter sp1ke727
- Start date
- Thread starter
- #2
- Thread starter
- #5
Sorry to be more clear:
Tool menu > Options > Select the "System" Tab >
then in the general options box the first click box
"single drawing compatibilty mode"
make sure this is checked
>apply>ok
After this you'll have seperate sessions of autocad.
of course using SDI at the command prompt is much easier thanks Exxit
Tool menu > Options > Select the "System" Tab >
then in the general options box the first click box
"single drawing compatibilty mode"
make sure this is checked
>apply>ok
After this you'll have seperate sessions of autocad.
of course using SDI at the command prompt is much easier thanks Exxit
- Status
Similar threads
- Locked
- Question
