Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Acceptable criteria for warehouse floors

Status
Not open for further replies.

Mahi20

Structural
Jun 24, 2004
5
Hi,
Is there a floor vibration criteria for warehouse floors? I can't find warehouse or storage in DG11.
Span grids 24x24m. There are office in Mezzanine floors.
Appreciate some advise.
 
Replies continue below

Recommended for you

You can look at ASTM and ISO standards along with industry standards for robotics and automated logistics.
 
Is the storage space elevated, or on grade. No vibration concern for the latter.
 
I've only dealt with three kinds of suspended floor warehouse occupies:

1) Mezzanine office space with normal DG11 criteria;

2) Non-office space and nobody gave a damn about vibration;

3) They cared so much about vibration that project specific, special use vibration targets such as those mentioned by RRiver were paramount. Robotic storage systems etc.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor