Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Access denied

Status
Not open for further replies.

hi808nv702

Computer
Dec 21, 2004
10
0
0
US
Is this some sort of a setting problem?.

Under "HELP"

i.e: Dimensions - properties - name

Access denied. "INTERNET EXPLORER SCRIPT ERROR"

 
Replies continue below

Recommended for you

Are you using Windows XP with SP 2? You might need to have an extension reapplied within Explorer to get the display to work properly (Active X or Java Script or something similar). If you recently installed SP 2, you can probably expect some of these things to happen.

Also, use SP 0.1 for SW 2005--that will help with using Windows XP SP 2.


Jeff Mowry
Reality is no respecter of good intentions.
 
You need to make sure the box that says:

Show Dimension Names is unchecked

It is located under Tools, Options, and is on the System Options Tab.

I hope this is what you were looking to do.
 
Looks like you've got a solution.

What I meant was that sometimes after moving to XP SP 2 you will find certain "plug in" applications blocked by default when using Explorer and may need to do certain things (such as reinstall) those plug ins (such as flash and other plug ins that Explorer uses) to get them to function again. This is because of the increased default security settings within XP SP 2.


Jeff Mowry
Reality is no respecter of good intentions.
 
Status
Not open for further replies.
Back
Top