Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

AFT IMPULSE RESULTS INTERPRETATION

Status
Not open for further replies.
mectub

mectub

Mechanical
Mar 4, 2009
22
Hi everyone, does the AFT Impulse software output shows the overpressure value (just output ?P)or the result include the permanent estatic pressure (P=PO+?P)
PO: Operating pressure
P: Total pressure
?P: Increse of pressure due to water hammer
 
Status
Not open for further replies.

Similar threads

andradesilva
  • Locked
  • Question
Problem seeing results in Paraview,OpenFOAM
Replies
0
Views
592
andradesilva
andradesilva
Ouahmed
  • Locked
  • Question
AFT impulse
Replies
1
Views
157
EloyRD
EloyRD
skhan547
  • Locked
  • Question
STAR-CCM+ Stopping simulations after residuals convergence
Replies
0
Views
338
skhan547
skhan547
Kc92
  • Locked
  • Question
Strange results of melt front. Help!
Replies
0
Views
107
Kc92
Kc92

Part and Inventory Search

Sponsor

Back
Top Bottom