Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Algor with Moldflow interface compared to other FEA codes

Status
Not open for further replies.

polymecheng11

Materials
Aug 4, 2011
1
How does Algor with the Moldflow interface compare with other nonlinear FEA software like Ansys and ABAQUS when evaluating highly non-linear problems for polymers (plastics, rubber etc.)?
 
Replies continue below

Recommended for you

isn't moldflow only for filling simulation, not a true FEA tool?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor