Allowable Stress Value for ASTM A155

[Jinunim]

I'm working on old refinery revamping project, and I need to tie-in from ASTM A155 Gr.C55 CL.I.
The material has been replaced in 1978 so, I cannot find any allowable stress values.

Few days back in #thread292-16187, A155 allowable stress value is available in ASME B31.3- 1976.
So, I'd like to purchase ASME B31.3-1976 Edition, however I cannot find where I can.

Please let me know how can I purchase any official code which shows ASTM A155 Gr.C55 CL.I. allowable stress values.

 

[metengr]

In lieu of trying to purchase an older specification, if you review ASME B&PV Code, Section II, Part D, the allowable stress for SA 671 Class 55 could be used.

 

[Jinunim]

I agreed.
I've also requested same, but Company rejected proposal.
Is there any official basis for the replacement of SA671 Class 55?

 

[metengr]

Yes, please see below

https://www.astm.org/Standards/A155.htm

 

[sharmass]

Jinunim
You can try National Board for out of print ASME editions.

http://www.nationalboard.org/Index.aspx?pageID=290