Aluminium Oval Section

[PaulD76]

Hi,
I am looking to source an aluminium oval section or flat oval section, supplier must be in the EU.
Will consider any grade, approx dims = wall thickness should be about 3mm, width = 50mm, height = 80mm,

Thanks

 

[CoryPad]

Alcoa

http://www.alcoa.com/locations/germany_hannover/en/home.asp

Sapa

http://www.sapagroup.com/

Hydro

http://www.hydro.com/en/Products/Extruded-products/Extruded-profiles/

 

[PaulD76]

Thanks for a quick reply CoryPad.

I have used hydro before ok for a custom design, how ever looking standard sections.

 

[boo1]

we used a round pipe and pressed it to an oval section

 

[berkshire]

Can you use mast extrusions
B.E.