Aluminum Embedded on the Concrete (Window) 3

[juniorfacadeengr]

Hi,

I hope somebody can help me. I'm a junior facade engineer and I'm wondering if this design is feasible? The aluminum is embedded on the concrete and there won't be any mechanical fixing. The window is 1200mmHx850mmW in size.

Thank you in advance!

 

[dold]

Definitely not recommended.
1. You typically want to avoid embedding aluminum in concrete due to corrosion concerns.
2. The alignment will never be correct.
3. You'll never get the concrete to consolidate properly inside that profile.
4. Contractors will hate you.
5. No adjustment possible after casting.

 

[juniorfacadeengr]

Definitely not recommended.
1. You typically want to avoid embedding aluminum in concrete due to corrosion concerns.
2. The alignment will never be correct.
3. You'll never get the concrete to consolidate properly inside that profile.
4. Contractors will hate you.
5. No adjustment possible after casting.

I really appreciate your advise. But just wondering does it have any structural concerns?

 

[jhnblgr]

never place aluminum into concrete
Consolidation issues
Construct ability issues

 

[dold]

I really appreciate your advise. But just wondering does it have any structural concerns?

Yes, those are all structural concerns. I.e., the window will probably fall out and smash someone due to reasons #1 and #3.

Mechanical attachment is pretty much the only way to go.

 

[juniorfacadeengr]

never place aluminum into concrete
Consolidation issues
Construct ability issues

Thank you so much!

 

[juniorfacadeengr]

Yes, those are all structural concerns. I.e., the window will probably fall out and smash someone due to reasons #1 and #3.

Mechanical attachment is pretty much the only way to go.

Construct ability issues

Thank you so much!