Dec 2, 2007 #1 yahoo123 Bioengineer Nov 6, 2007 87 Does anybody know of a table for standard aluminum shapes online? Thanks!
Dec 2, 2007 #2 PEinc Geotechnical Dec 2, 2002 4,085 http://www.americanaluminum.com/aluminum-extrusions/aluminum-shapes.htm Upvote 0 Downvote
Dec 2, 2007 #3 Gas1978 Civil/Environmental Dec 2, 2007 3 hi, if you go to bs on line you can shearch for bs 8118 see link: http://www.bsonline.bsi-global.com/search/results/1 Upvote 0 Downvote
hi, if you go to bs on line you can shearch for bs 8118 see link: http://www.bsonline.bsi-global.com/search/results/1
Dec 2, 2007 Thread starter #4 yahoo123 Bioengineer Nov 6, 2007 87 The links are not standard shapes. Does anybody have links to the standard aluminum shapes? Thanks. Upvote 0 Downvote
Dec 2, 2007 #5 PEinc Geotechnical Dec 2, 2002 4,085 You may need to spend big bucks to get what you want. That's what I had to do. http://www.aluminum.org/Template.cf...e=/Ecommerce/ProductDisplay.cfm&Productid=563 Upvote 0 Downvote
You may need to spend big bucks to get what you want. That's what I had to do. http://www.aluminum.org/Template.cf...e=/Ecommerce/ProductDisplay.cfm&Productid=563
Dec 2, 2007 #6 JedClampett Structural Aug 13, 2002 4,031 PEinc has some good advice. A cheaper, not as good alternative is: http://www.ryerson.com/stocklist/StocklistServlet?COM=GetTable&ID=1687They have amgles, channels and other shapes if you look at other tabs. Upvote 0 Downvote
PEinc has some good advice. A cheaper, not as good alternative is: http://www.ryerson.com/stocklist/StocklistServlet?COM=GetTable&ID=1687They have amgles, channels and other shapes if you look at other tabs.
