AMADA FO-3015/i160-L Fanuc 2

[nidmus]

Hello,
I work in a thin sheet metal company on a laser cutting machine (AMADA FO-3015/i160-L Fanuc) and I have a problem!
the sensor calibration program has been removed and Maintenance I can not do the calibration when changing suck ...
I want to get how to restore or install the program

 

[nidmus]

 

[b20vtechb]

are you talking about O8010?

 

[nidmus]

yes sir

 

[b20vtechb]

i'll have it for ya in a few hours

 

[b20vtechb]

O8010 (HS 98 REGULATION)
G00X0Y0 (ENTER POSITION OF CALIBRATION HERE)
M00
#26 =30
#32 =1
IF [#4006 NE20] GOTO1
#32 =25.4
N1 G91 G88 Z0
M722
M727
G90 G00 Z[#26/#32]
WHILE [#1001 NE1] DO1
G91 G00 Z-[0.1/#32]
END1
G91 G00 Z[3/#32]
G04
WHILE [#1001 NE1] DO1
G91 G00 Z-[0.02/#32]
G04 X0.02
END1
G91 G00 Z[2.8/#32]
G04 X0.5
M727
G00 Z[-1.3/#32]
G04 X0.5
M727
G00 Z[-1.3/#32]
G04 X0.5
M727
G91 G88 Z0
M727
M723
M30

 

[nidmus]

it's great. thank you very much