R4725
Agricultural
- Jan 23, 2014
- 28
Good day, I am having some troubles started getting a blank screen when booting up once and a while mid summer if I shut down and reboot once or twice it would boot up normal that seems to be a problem every time I shut down the NC controller now so I have been leaving it on it is also taking more tries to get it to boot up when it is a problem, just after it starts to boot it a blank screen with the words MACRO ROM MODULE in the middle nad upper left corner 900 ROM PARITY. Now yesterday the machine seemed to lock up while in the middle of a cut same blank screen but a different message said 950 PMC System Alarm. I reboot the machine and got the head to reference and the table to switch but seems the fans are not coming on in the resonator box, and laser squence reads zero. I will attach a couple photos and a video if it will let me. seems that something isn't powering up where does a guy start looking. maybe these two problems aren't even related but either way I am dead in the water at the moment here. TIA