Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Amada LC 2415 A3 3KW cutting parameters

Status
Not open for further replies.

Skipper_SKG

Mechanical
Jan 23, 2020
1
Hello.
i am the operator on an amada lc 2415 3kw laser machine. i would like some help with cutting parameters on galvanized steel in 1mm, 1.2mm, 1.5mm and 2mm.
thank you very much
 
Replies continue below

Recommended for you

as a general rule i cut galavanized with the stainless steel cutting condition for the same thickness at %60 speed
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor