Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Amada Software CSV Format

Status
Not open for further replies.

Troy Alarie

Industrial
Sep 16, 2022
2
Hello,

I am hoping there is someone who has experience with Amada laser software Dr Abe. I had to restore the settings recently and I didn't back up my csv setting and now for the life of me, I can get it to work. Keeps showing CVS format is wrong. I have been using these csv's for over a year and now I cant seem to correct the formate.

Here is a sample of the csv

PART NAME,PART COMMENT,MATERIAL TYPE,MATERIAL THICKNESS,PART QTY,LASER MATERIAL NAME
\\Gdtmain\simain backup\DXF FILES\SD36-SP-2.DXF,WO077996,T316,0.060,1,SH16GA-2B-316-2

Capture_vuqhfd.jpg


and here is the display setting
Capture-1_ksculu.jpg


It all seems in order but I keep getting the CSV format is wrong msg.
 
Replies continue below

Recommended for you

Status
Not open for further replies.

Part and Inventory Search

Sponsor