Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Amine plate exchanger underperformance
- Thread starter ris2
- Start date
investigate the links in this thread: thread391-84258
i'd start with the design information obtained from the mfg. and investigate all process & exchanger data. double check the calcs.
just what underperformance are you referring to? is exchanger new or existing? for new exchanger, i'd start with exchanger designer of record. for existing, could be a fouling problem, depending upon operating temps and fluid properties.
good luck!
-pmover
i'd start with the design information obtained from the mfg. and investigate all process & exchanger data. double check the calcs.
just what underperformance are you referring to? is exchanger new or existing? for new exchanger, i'd start with exchanger designer of record. for existing, could be a fouling problem, depending upon operating temps and fluid properties.
good luck!
-pmover
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Question