Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

amonia boiling point 2

Status
Not open for further replies.

solcool

Electrical
Nov 9, 2006
4
0
0
IL
what is the temp require in C* or F* to boil amonia compressor in order to create refrigeration or cooler
Joe
 
Replies continue below

Recommended for you

The accepted number is Minus 28 Deg. F. The saturation pressure for R-717 is equal to atmospheric...

But put a pail of any volatile on the floor and blow air across it and it will cool the liquid way below the saturation pressure....With ammonia, minus 60 or minus 70 is easy to achieve this way. Nobody will stand down wind of it, though.
 
Status
Not open for further replies.
Back
Top