Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Analog Multiplexing (Multiple Duplexing)

Status
Not open for further replies.

wstorts

Electrical
May 27, 2002
4
US
I am looking for any information re: the above with an array size of 512 or 1024 channels, that will address line speed of 1-20mhz. Individual channel logic is 48Khz with an AM envelope.

I want to be able to time slice 512 48 kilacycle signals into a single trunk line without introducing distortion.
 
Replies continue below

Recommended for you

Hi, first you need to digitise each signal,send it down the link, reconstruct each 1 at the other end.You will also need some form of syncronising signal.
 
Well, you have to sample each channel with 2*48K ---> 100khz
frequency. This includes one constant channel for sync.

The sum must have 50 MHz bandwidth. <nbucska@pcperipherals.com>
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top