Oct 14, 2008 #1 Senad83 Mechanical Jul 13, 2007 43 0 0 NO Hi all, I'm expiriencing some problems when submitting job in Abaqus 6.8-1. The job is submitted but wont start running. Anybody else had this problem? Never happend in 6.6-1 or 6.7-1. Regards Senad
Hi all, I'm expiriencing some problems when submitting job in Abaqus 6.8-1. The job is submitted but wont start running. Anybody else had this problem? Never happend in 6.6-1 or 6.7-1. Regards Senad
Oct 14, 2008 #2 guru64 Mechanical Oct 14, 2008 21 0 0 What is the error message you get? Upvote 0 Downvote
Oct 14, 2008 Thread starter #3 Senad83 Mechanical Jul 13, 2007 43 0 0 NO The problem is that there is no error file. The job is submitted, but never starts running. It just stays submitted for ever. Senad Upvote 0 Downvote
The problem is that there is no error file. The job is submitted, but never starts running. It just stays submitted for ever. Senad
Oct 14, 2008 #4 guru64 Mechanical Oct 14, 2008 21 0 0 if you have the input file then directly submit that file to abaqus solver. abaqus job=<inputfilename.inp> Then check the log and dat file Upvote 0 Downvote
if you have the input file then directly submit that file to abaqus solver. abaqus job=<inputfilename.inp> Then check the log and dat file
Oct 15, 2008 #5 DanStro Mechanical Dec 11, 2004 390 0 0 US I've had this happen when a previous analysis stopped unexpectedly. Restarting my computer seemed to be the most reliable way of getting it back. HTH Dan Upvote 0 Downvote
I've had this happen when a previous analysis stopped unexpectedly. Restarting my computer seemed to be the most reliable way of getting it back. HTH Dan
Oct 18, 2008 #6 Noirom84 Mechanical Mar 17, 2008 33 0 0 PL Hi In my opinion you have problem with license. When job is not 'running" that mean that all abaqus tokens have been taken by another analysis. Regards Upvote 0 Downvote
Hi In my opinion you have problem with license. When job is not 'running" that mean that all abaqus tokens have been taken by another analysis. Regards