Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Anchor point in HOLE tool

Status
Not open for further replies.
sudhakarn

sudhakarn

Automotive
Apr 1, 2013
506
hi,

Does any one know the application of Anchor point in Hole tool in CATIA V5 ? Thanks in Advance.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
look at the TAPERED hole and the Counterdrilled hole, and I think you'll understand the use of the Anchor Point as a reference.
 
Upvote 0 Downvote
Thanks for your reply. Will try and get back to you.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Jegsaran
  • Locked
  • Question
Read point coordinates in CATIA using python
Replies
1
Views
1K
LWolf
LWolf
Sriram V
  • Locked
  • Question
Finding Layup location in a tool by comparing surfaces in catia v5
Replies
0
Views
299
Sriram V
Sriram V
U
  • Locked
  • Question
Point on curve on min curvature radius
Replies
4
Views
2K
ulitsakalarash
U
rookiezzz
  • Locked
  • Question
Return the nearnest surface and edge from body against point 1
Replies
2
Views
2K
rookiezzz
rookiezzz
S
  • Locked
  • Question
Adding a Custom Toolbar as an Add-in in CATIA
Replies
5
Views
3K
Little Cthulhu
Little Cthulhu

Part and Inventory Search

Sponsor

Back
Top Bottom