Angle limited clamp for sharpening flat hone machine

[Beltenebros]

Hello,

I've been trying to find an off the shelf articulated arm that could set an angle limit on a clamp.
It works on machines like these so you can sharpen a shear without going beyond the set angle.
The arm in general it's quite straight forward, but what is the correct name for the swivel clamp with the grade scale on it? How do you start making such a thing?


Thanks.

 

[mfgenggear]

OP
couple of questions is this sharpening a shear blade. for shear sheet metal.

 

[Beltenebros]

Hi, For sharpening hairdresser concave scissors or shears mostly.

Thanks

 

[mfgenggear]

OP
OK now I follow , your devise should have an instruction manual on their web site.

There are 100's of you tube videos on sharpening scissors.

Is this for sharpening for a business. If so contact the manufacture of the device.
Ai results on the angle
The typical angle on a pair of scissors is between 40 and 45 degrees. However, this can vary depending on the type of scissors, with some specialty scissors having a sharper or duller angle based on their intended use.

Key points about scissor angles:

• General purpose scissors:
  Most standard scissors have a sharpening angle between 40-50 degrees.
  
  
• Precise cutting scissors:
  Professional-grade scissors designed for precise cuts may have a sharper angle around 38 degrees.
  
  
• Delicate scissors:
  Scissors used for delicate tasks like embroidery or cuticle trimming may have a smaller angle around 25-30 degrees.
  
  
• Heavy-duty shears:
  Larger fabric shears or industrial scissors may have a wider angle between 35-40 degrees.
  

How to Sharpen Scissors - Work Sharp
Sep 26, 2020 — Like knives, scissors have varying angles, from 0 degree (such as children's safety scissors) to 25 degrees (such as delicate specialty kitchen scis...

Work Sharp

Нow to sharpen

 

[mfgenggear]

For a simple home sharpening I would hand sharpen on a flat diamond atv45 degrees
Couple stokes is all it takes.