Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Angular velocity

Status
Not open for further replies.
thirumalai

thirumalai

Mechanical
Sep 29, 2003
17
0
0
IN
Can any one pls tell me how angular velocity is being taken in ANSYS. The option asks for velocity w.r.t global cartesian only. But I need to model 2 rollers rotating at different speeds(Contact analysis when subjected to axial thrust). How to go about?
Thanks in advance
Thiru
 
Status
Not open for further replies.

Similar threads

Chaitanya07
  • Locked
  • Question
velocity intialization of two approaching liquid drop collision in air medium (Fluent) ?
Replies
0
Views
4
Chaitanya07
Chaitanya07
HilaryE
  • Locked
  • Question
Porous zone - setup of lab air tunnel - velocity v's pressure drop
Replies
0
Views
5
HilaryE
HilaryE
SaiKiranK
  • Locked
  • Question
Rotational velocity in modal analysis for cyclic symmetry
Replies
0
Views
7
SaiKiranK
SaiKiranK
struclearner
  • Locked
  • Question
Angular Acceleratin Units in ANSYS APDL
Replies
2
Views
3
struclearner
struclearner
struclearner
  • Locked
  • Question
Inertia Load / Angular Accelertaion to certian components in Static Analysis
Replies
0
Views
1
struclearner
struclearner
Back
Top