Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Animator (only one path?)

Status
Not open for further replies.
gross01

gross01

Mechanical
Joined
Jul 3, 2002
Messages
38
Location
CA
I just started playing with animator and was wondering if you can assign more than one path to an object.
At worst case I was hoping to have a path per confuration but do not see this.

if so is there a work around

thanks for taking the time to read.
-Caper-
 
Status
Not open for further replies.

Similar threads

PEU
  • Locked
  • Question Question
two paths two pivot points
Replies
12
Views
8K
PEU
PEU
K
Chain Path
Replies
0
Views
2K
kpinks
K
H
How to cut a 3d curved smooth path for fluid entry in a cuboid
Replies
0
Views
3K
haripavany
H
pirateincognito
  • Locked
  • Question Question
Copy / Paste components from one assembly to another and retain positioning
Replies
2
Views
1K
pirateincognito
pirateincognito
loworange88
  • Locked
  • Question Question
take a part from one assembly and place it into another
Replies
2
Views
267
ctopher
ctopher

Part and Inventory Search

Sponsor

Back
Top