ANSA Meshing a Pre-Meshed Part

[cd5486]

Hello,

I have a part as a input abaqus meshed file. I do not have the geometry. I am trying to mesh it again, although I believe to create a more custom mesh, I would require CONS and other parameters which are in geometry. Is there any way to make geometry again from the meshed part, or atleast get CONS and other parameters in ANSA.

Thank you in advance.

 

[FEA way]

You can recreate the geometry from mesh in Abaqus, at least for not too complex parts, using the Geometry Edit --> Face --> From element faces tool.

 

[cd5486]

Is it possible to do it in ANSA ?