Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSI/ASME B18.2.1 Metric vesion code

Status
Not open for further replies.

nitin36537

Civil/Environmental
Joined
Feb 16, 2001
Messages
60
Location
IN
For one of our project we have supply Bolts as per ASTM A394-08 , but having diameter = 16 millimeter. ASTM A394-08 refer to ANSI/ASME B18.2.1 for inch dimensions. Which is the equivalent code of B18.2.1 with metric dimension ?


As per ASTM A394-08 Thread length = 1.25 " for 5/8" Dia bolts , while as per B.18.2.1 it is 1.5" . Why ?

Thanks

Nitn Patel
 
IIRC the thread length is limited in A394 because they want to exclude the threads from the shear plane. In the tower world we don't count on the bolts being tight to transfer the load through friction, only through shear through the bolt shank.

_____________________________________
I have been called "A storehouse of worthless information" many times.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top